| Tittel: | GOODYEAR AIRCRAFT TIRE MANUAL and TIRE DATA : (and) a guide for inspecting, maintaining and mounting aircraft tires |
| Forfatter: | Widerøe |
| Materialtype: | Manual/Sivil |
| Signatur: | 23-C-2 |
| Utgitt: | Akron, Ohio : GOOD YEAR AVIATION PRODUCTS |
| Omfang: | ill. |
| Emneord: | Aircraft Tire / Goodyear / Service letter / Tire Data / Widerøe |
| Materialbetegnelse: | Technical Handbook |
| Materialbetegnelse: | Perm |
| Note: | There are no publishing date on the items.
There are 3 different items with different names. |
| Innhold: | TABLE OF CONTENTS:
LETTER FROM GOODYEAR TO WIDERØE
SERVICE LETTER
a guide for inspecting, maintaining and mounting aircraft tires
Contents:
Purpose of Guide
Aircraft Tire Construction
Tread Wear Symptoms and Causes
Tread Conditions
Cut or Snag
Blister
Open Tread Splice
Tread Flaking and Chipping
Tread Chunking
Peeled Rib
Fabric Fraying
Thrown Tread
Skid
Tread Rubber Reversion
Tread Separation
Groove Cracking and Rib Undercutting
Chevron Cutting
Sidewall Conditions
Cut or Snag
Circumferential Cracks
Radial Cracks
Sidewall Separation
Weather Checking
Bead Conditions
Brake Heat Damage
Kinked Bead
Carcass Conditions
Liner Breakdown
Impact Break
Mounting and Demounting
Fusible Plugs
Handling Beads
Bead Lubrication
Wheel Balance
Tools and Accessories
Preventive Maintenance
Inflation
Checking
Pressure Data
Climate Adjustments
Loaded Inflation
Mounted Tubed Tires
Mounted Tubeless Tires
Nylon Stretch
Dual Pressure
RTO Procedures
AIRCRAFT TIRE MANUAL
Section Contents
1. INTRODUCTION
2. GENERAL DATA
2.1 Aircraft Tire Construction
2.2 Tire Markings
2.3 Tire Schematic
2.4 Tire Types
2.5 Tread Patterns
2.6 Product Lines
2.7 Current Deisgn
2.8 Aircraft Tubes
3. PREVENTIVE MAINTENANCE
3.1 Inflation Pressure
3.2 Special Procedures After a Rejected Takeoff
3.3 Matching Dual Tires
3.4 Protecting Tires from Chemicals and Exposure
3.5 Condition of Airport Surfaces
4. MOUNTING AND DEMOUNTING
4.1 Manufacturer's Instructions
4.2 Safety Precautions with Split Wheels
4.3 Demounting Tires from Split Wheels
4.4 Mounting Tubeless Tires on Split Wheels
4.5 Mounting Tube-Type Tires on Split Wheels
4.6 Wheel Tire Assembly Balancing
5. INSPECTION, REPAIR AND STORAGE
5.1 Tread Wear Patterns
5.2 Tread Conditions
5.3 Sidewall Conditions
5.4 Bead Conditions
5.5 Carcass Conditions
5.6 Inspecting Mounted Tires
5.7 Inspecting Demounted Tires
5.8 Air Loss in Tubeless Tires
5.9 Tube Inspection and Repair
5.10 Retreading
5.11 Tire and Tube Storage
5.12 Tire and Tube Age Limit
5.13 Tire Incident Report
6. TECHNICAL DATA
6.1 Tire Size Selection
6.2 Inflation Under Load
6.3 Tire Measuring Procedures
6.4 Operating Tire Temperatures
6.5 Load Ratings for Beaching Gear of Helicopters
6.6 Radius of Gyration
6.7 Standard Growth Allowance
6.8 Minimum Clearance Allowance
6.9 High-speed Considerations
6.10 Tread Conditions
7. CAPABILITIES AND FACILITIES
7.1 Management
7.2 Engineering
7.3 Testing
7.4 Quality Control
7.5 Tire Production Sources
AIRCRAFT TIRE DATA
Section Contents
1. INTRODUCTION
2. DEFINITIONS AND ABBREVIATIONS
3. QUALIFICATION SPECIFICATION
4. DATA SECTION - TIRES
5. DATA SECTION - TUBES
6. SERIAL NUMBER CODES - TIRES
6.1 U.S.A. Commercial and Military
6.2 International Commercial
6.3 International Military
7. APPLICATION CHARTS
7.1 General Aviation/Business Aircraft
7.2 Commercial Aircraft
7.3 Military Aircraft |
| Eier: | Norsk Luftfartsmuseum |
| |
|