| Tittel: | HAMILTON STANDARD MAINTENANCE MANUAL WITH ILLUSTRATED PARTS BREAKDOWN : VARIALBE PITCH AIRCRAFT PROPELLER MODEL 24PF-305 | | Materialtype: | Manual/Sivil | | Signatur: | 20-A-4 | | Utgitt: | Hamilton Standard, 1975 | | Emneord: | Aircraft Propeller / Hamilton Standard / Illustrated Parts List / Maintenance level / Maintenance manual / Model 24PF-305 / United Technologies / Widerøe's Flyveselskap | | Materialbetegnelse: | Perm | | Note: | Published November 1/1975
Last Revision: Revision No. 18, Revision Date Juni 1/1986
Temporary Revision No. 61-10, Revision Date February 6/1992
Record of WF-Supplements, Supplement No. 2, Date Inserted 1/4-93 | | Innhold: | TABLE OF CONTENTS:
Description and Operation
1. General
2. Description
3. Operation
4. Life Limited Components
Troubleshooting
1. General Instructions
Servicing
1. General
2. Filling the Barrel
3. Lubrication of Extension Dome
Removal/Installation
1. Special Tools
2. Removal/Installation of Propeller
3. Removal/Installation of Bulkhead and Rings
4. Removal/Installation of Beta Feedback Sleeve
5. Removal/Installation of Propeller Blade
6. Removal/Installation of Blade (Chevron) Seal
7. Removal/Installation of Blade Bearing
8. Removal/Installation of Blade Plug and Preformed Packing
9. Removal/Installation of Blade Retaining Ring Rubber Strip and Pad
10. Removal/Installation of Extension Dome
11. Removal/Installation of Dome Packing
12. Removal/Installation of Dome-to-Barrel Plate Packing and Barrel
Plate-to-Barrel Packing
13. Removal/Installation of Barrel Filler Bolt or Relief Valve and Adapter
Gasket Seal
14. Removal/Installation of Blade Heater Detachable Lead
15. Removal/Installation of Blade Heater
16. Removal/Installation of Blade Boot
17. Removal/Installation of Blade Control Switch and Electrical Lead
18. Removal/Installation of Brush Block
19. Removal/Installation of Brush
20. Removal/Installation of Deicer Timer
21. Removal/Installation of Spinner
22. Procedure for Removal of Propeller Which Does Not Feather
23. Procedure for Removal and Replacement of Inner Set Bearing Race
Insepction/Check
1. Service Inspection/Check
2. Deleted
3. Periodic Inspection
3A. Extension Dome and Propeller Barrel Raceway Inspection
3B. Deicer System Inspection
4. Major Inspections
5. Mounting Bolts
6. Brushes and Slip Rings
7. Inspection After Overspeed
8. Inspection After Impact
9. In-Service and Storage Inspection
10. Inspection of Abrasion Resistant Film Over Blade Heater
11. Inspection for Contamination
Cleaning/Painting
1. Cleaning
2. Erosion Coating
Consumable Materials
Consumable Materials Mixing and Curing Instructions
Approved Repairs
1. General
2. Spinner and Bulkhead
2A. Probeller Blades
3. Fiberglass Portion of Blade
4. Seam Bond Section of Blade
5. Foam Section of Blade
6. Blade Heater
6A. Coating Blades with ICEX (Optional)
7. Blade Boot
8. Blade Shank
9. Erosion Coating
9A. Erosion Protection of Heater Leading Edge (Optional)
10. Spinner Nose Cap PN 781112-1 Installation (Optional)
11. Spinner Nose Cap Installation - Accelerated Adhesive Curing Method
12. Recoating of Blade Retaining Ring Repair
13. Extension Dome Taping - Interim Repair
14. Teflon Brush Block Pad
Preparation for Service and Storage
1. Removal of Components from Containers
2. Propeller Buildup for Service
3. Propeller Balance
4. Oil Testing
4A. Final Propeller Buildup
5. Storage Instructions
Torque Values
Maintenance Level Illustrated Parts Breakdown
1. Explanation of Configuration Control
2. Description of Other Parts Listing Procedure
Brush Block Housing Assembly
Extension Dome Assembly | | Eier: | Norsk Luftfartsmuseum | | |
|
| 1.ex | Ikke til utlån | | Norsk Luftfartsmuseum | Norsk Luftfartsmuseum | | | |
|
|